Weekly:

• Test pH.  Ideal is 7.4 to 7.6.  Acceptable is 7.2 to 7.6.

• Test the Total Alkalinity.  Ideal is about 120 ppm.

• Test the Calcium Hardness.  Ideal is about 200 ppm. **

• Add SpaGuard® Natural Spa Enzyme and SpaGuard® Stain & Scale Control following the label instructions.

• Shock your spa or hot tub with SpaGuard® Enhanced Shock

Monthly:

• Top off SpaGuard® Spa Sentry as per label instructions.

• Clean filter cartridge with SpaGuard® Filter Cleaner to remove excess greases & oils.

• Replace the Bromine (yellow) cartridge

Every 3 to 4 Months:

• Drain, clean, polish and refill spa or hot tub based on usage.

• Replace BOTH Blue & Yellow cartridges

For Regular Start up, click here

To Purchase Spa Frog® products mentioned, click here

To Purchase SpaGuard® products mentioned, click here

** Special Note:
If using SpaGuard® Spa Sentry, DO NOT balance the Calcium Hardness.  Spa Sentry will take care of this.  Also, DO NOT turn on the spa or hot tub's heater until the water has cleared through filtration or add Spa Sentry AFTER the water has reached its normal operating temperature.

Spa & Hot tub Safety - Do's & Don'ts for everyone's sake

Translate this page or any of our pages using the tool below :