PristineBlue®
non-chlorine,
non-bromine Hot water care...
Maintenance...
Every two weeks,
-
Balance the water.
Total Alkalinity 30-90 ppm (DO NOT allow the Total Alkalinity to go
over this level)
pH 7.2-7.6
Calcium Hardness – 175 to 275 ppm**
SpaGuard®
Water Balancers such as pH Increaser, Decreaser, Total Alkalinity
Increaser, Spa Sentry, Calcium Hardness Increaser are 100% compatible with Pristine Blue®.
All
SpaGuard®
Cleaners cleaners & accessory chemicals such as Spa Silken are also 100%
compatible.
-
Test PristineBlue®
(copper) level and add PristineBlue®
according to the table below.
-
Add 5 milliliters of Pristine Clean®
per 100 gallons of spa
water. (2 oz. per 500 gallons)
-
Shock the spa with Pristine Extra
Every 3 to 4 Months:
-
Drain, clean, polish and refill
spa or hot tub based on usage.
-
Repeat start up procedures
Gallons of Spa Water
| PB Level |
150 |
200 |
300 |
400 |
500 |
700 |
| 0.1 ppm |
10 |
10 |
15 |
18 |
24 |
36 |
| 0.2 |
6 |
10 |
12 |
18 |
21 |
30 |
| 0.3 |
6 |
10 |
12 |
15 |
18 |
27 |
| 0.4 |
6 |
6 |
10 |
12 |
15 |
21 |
| 0.5 |
3 |
6 |
6 |
10 |
12 |
15 |
| 0.6 |
3 |
3 |
6 |
6 |
10 |
12 |
| 0.7 |
3 |
3 |
3 |
3 |
6 |
10 |
| 0.8 |
0 |
0 |
3 |
3 |
3 |
3 |
| 0.9 |
0 |
0 |
0 |
0 |
0 |
0 |
Milliliters
of PristineBlue®
to add
PLEASE NOTE:
All Pristine Blue® Spa treatment additions are in MILLILITERS not ounces.
Use the measuring cup that came with your start up kit.
For Regular PristineBlue®
Start up,
click here
To Purchase PristineBlue®
Spa & Hot tub products
,
click here
To Purchase SpaGuard® products
mentioned,
click here
** Special
Note:
If using SpaGuard® Spa Sentry, DO NOT
balance the Calcium Hardness. Spa Sentry will take care of this.
Also, DO NOT turn on the spa or hot tub's heater until the water has cleared
through filtration or add
Spa Sentry AFTER the water has reached its normal
operating temperature.
Spa & Hot tub Safety - Do's & Don'ts for everyone's sake
Translate this page or any of our pages using the tool
below :
|
|