| Nature2®
Filter Cartridge Mineral Purifier (ionizers) Maintenance...
Weekly:
-
Test pH. Ideal is 7.4 to
7.6. Acceptable is 7.2 to 7.6.
-
Test the Total Alkalinity. Ideal is
about 120 ppm.
-
Test the Calcium Hardness. Ideal is
about 200 ppm. **
-
Add SpaGuard® Natural Spa Enzyme and
SpaGuard®
Stain & Scale Control following the
label
instructions.
-
Shock your spa or hot tub with
SpaGuard® Enhanced Shock
Monthly:
Every 3 to 4 Months:
-
Drain, clean, polish and refill
spa or hot tub based on usage.
-
Replace the Nature2®
Filter Cartridge Mineral Purifier
For Regular Start up,
click here
To Purchase Nature2® products
mentioned,
click here
To Purchase SpaGuard® products
mentioned,
click here
** Special
Note:
If using SpaGuard® Spa Sentry, DO NOT
balance the Calcium Hardness. Spa Sentry will take care of this.
Also, DO NOT turn on the spa or hot tub's heater until the water has cleared
through filtration or add
Spa Sentry AFTER the water has reached its normal
operating temperature.
Spa & Hot tub Safety - Do's & Don'ts for everyone's sake
Translate this page or any of our pages using the tool
below :
|